LGV TRAINING / PCV TRAINING FOR MODULE 3a REVERSE

What is CPC module 3a reverse training?

The Driver CPC Module 3a reversing exercise.

The Driver CPC Module 3a (mod 3a) is the off road reversing exercise. DF Training are an approved Module 3a testing site so your training and test can all be carried out together in one place.

Module 3a (mod 3a) focuses on vehicle safety and control. The test lasts approximately 30 minutes.

During the test you will be required to demonstrate your ability to:

Safely navigate and reverse in an 'S' shape manoeuvre and park in a area marked with a Yellow and Black Chevroned markings. Your area will be based on your vehicles length and category with a width no wider than 11m wide.
Un-couple your Tractor unit and safely park the vehicle. (BE, C1E, CE, D1E, DE categories only)
Re-couple your Tractor unit and safely park the vehicle. (BE, C1E, CE, D1E, DE categories only)

To pass you must safely navigate and park in the designated area with no more than 2x shunts (Vehicle change of diection) Knock over or displace any of the cones or the barrier or crosing the boundary lines with your vehicle tyres.

What should we do prior and during the test?

You must pass have passed your Hazard and Theory tests prior to test. All certificates will be required before your test can go ahead.
To make sure that you are feeling confident and ready for the test DF Training provides extensive training prior to each Module 3a test.
Training and test last approximately four hours and includes running through a normal vehicle check, refreshing your memory on the important security and safety features of the vehicle and best practice techniques,
At the end of the test, you get your result right away.